Manual Hoist HIT 10

The Habegger Manual Hoist HIT 10 is the all-rounder with the excellent ratio between pulling force and weight.
  
The all-rounder with the excellent ratio between pulling force and weight.

Description

All HIT wire rope hoists function on the same principle.  A wire rope of any length is guided through two pairs of clamping jaws in a straight line.  When the drive lever is moved back and forth, the wire is moved forwards or backwards (according to the selection) smoothly and without slippage.  An ingenious lever mechanism means that one pair of clamping jaws opens and pulls in more wire, while the other remains closed.  This opening and closing is repeated alternately.  Both clamping jaws automatically close under load.  The clamping pressure increases in proportion to the tensile load.

Specifications

* Rated force (pulling, lifting, and lowering): 1000 kg
* Overload protection at: 1500 kg
* Weight without rope: 6.2 kg
* Rope diameter: 8.4 mm
* Effective rope breaking load: 5000 kg
* Load on lever at rated load: 30 kg 

Features

* Light alloy housing
* Anchorage bolts secured
* Overload protection by shear pin
* Exchangeable shear pins in jaw opening lever
* Case available 

Wire Ropes

Wire ropes for the HIT 10 are available in varying lengths with reel and without. It is recommended that only Habegger wire ropes be used with their hoists.  Use of any other wire rope will nullify the warranty.

Download

Dimensions
Habegger Rope Hoists