Accessories

Lever tube/handle for HIT 6

Steel rope pulley with 12.8 ton WLL has 2 rollers with maximum diameters of 16 mm.With pulleys, it is possible to move a multiple of the load using a wire rope hoist with the same rate force. This is achieved without using a thicker...

Steel rope pulley with 12.8 ton WLL and ball bearings has 1 roller with maximum diameter of 20 mm.With pulleys, it is possible to move a multiple of the load using a wire rope hoist with the same rate force.  This is achieved without...

Aluminum rope pulley with 6.4 ton WLL has 2 rollers with a maximum diameters of 11 mm.With pulleys, it is possible to move a multiple of the load using a wire rope hoist with the same rate force.  This is achieved without using a...

Steel rope pulley with 6.4 ton WLL and ball bearings has 1 roller with a maximum diameter of 16 mm.With pulleys, it is possible to move a multiple of the load using a wire rope hoist with the same rate force.  This is achieved...

Aluminum rope pulley with 6.4 ton WLL and ball bearings has 1 roller with maximum diameter of 16 mm.With pulleys, it is possible to move a multiple of the load using a wire rope hoist with the same rate force.  This is achieved without...

Aluminum rope pulley with 6.4 ton WLL and plain bearings has 1 roller with maximum diameter of 16 mm.With pulleys, it is possible to move a multiple of the load using a wire rope hoist with the same rate force.  This is achieved without...

Steel rope pulley with 3.2 ton WLL and ball bearings has 1 roller with maximum rope diameter of 11 mm. With pulleys, it is possible to move a multiple of the load using a wire rope hoist with the same rate force.  This is...

Aluminum rope pulley with 3.2 ton WLL and plain bearings has 1 roller with a maximum rope diameter of 11 mm. With pulleys, it is possible to move a multiple of the load using a wire rope hoist with the same rate force.  This...

Lever tube/handle for HIT 10

Shear/Safety pin for HIT 10/T-15. Diameter 7 mm x length 22 mm.Brass Shear/safety pins for manual hoist HIT 10/t-15 Specifications * Diameter:  7mm * Length:  22mm Downloads Accessories Information  Habegger Brochure

Shear/Safety pin for HIT 6. Diameter 5.5 mm x length 20 mm.Brass Shear/safety pin for manual hoist HIT 6 Specifications * Diameter:  5.5mm * Length:  20mm Downloads Accessories Information Habegger Brochure 

Shear/Safety pin set includes a selection of shear pins for all types of manual hoists as well as countersunk screws and washers. Shear/safety pin set for manual hoists HIT 6, 10, 16, 32, T-7, & Y-15 Set Includes * 10 Brass Shear Pins for...

Shear/Safety pin for HIT 16/32. Diameter 7.5 mm x length 29 mm.Brass Shear/safety pin for manual hoist HIT 16/32 Specifications * Diameter:  7.5mm * Length:  29mm Downloads Accessories Information (pdf) Habegger Brochure 2013 (pdf)

Lever tube/handle for HIT 16/32

CONI-KLAM wedge-type clamping tools are simple and practical devices for clamping and catching the wire ropes when pulling.  The rope is held by clamping jaws that can be moved in parallel.  CONI-KLAM clamping tools are self-tensioning; the holding force is always set in accordance...

CONI-KLAM wedge-type clamping tools are simple and practical devices for clamping and catching the wire ropes when pulling.  The rope is held by clamping jaws that can be moved in parallel.  CONI-KLAM clamping tools are self-tensioning; the holding force is always set in accordance...

CONI-KLAM wedge-type clamping tools are simple and practical devices for clamping and catching the wire ropes when pulling.  The rope is held by clamping jaws that can be moved in parallel.  CONI-KLAM clamping tools are self-tensioning; the holding force is always set in accordance...