Manual Hoist HIT 32

The Habegger Manual Hoist HIT 32 is the powerhouse of the manual wire rope hoists. Pulling force in excess of 3 tonnes.

The powerhouse of the manual wire rope hoists, with a pulling force in excess of 3 tons.

Description

All HIT wire rope hoists function on the same principle. A wire rope of any length is guided through two pairs of clamping jaws in a straight line. When the drive lever is moved back and forth, the wire is moved forwards or backwards (according to the selection) smoothly and without slippage. An ingenious lever mechanism means that one pair of clamping jaws opens and pulls in more wire, while the other remains closed.  This opening and closing is repeated alternately. Both clamping jaws automatically close under load. The clamping pressure increases in proportion to the tensile load.

Specifications for the HIT 32

Rated force (pulling, lifting, lowering): 3200 kg
Overload protection at: 4800 kg
Weight without rope: 21.5 kg
Rope diameter: 16.2 mm
Rope feed per double stroke: 30 mm
Effective rope breaking load: 16000 kg
Load on lever at rated load: 50 kg

Features

• Light alloy housing
• Anchorage bolts secured
• Overload protection by shear pin
• Exchangeable shear pins in jaw opening lever
• Expansion for hydraulic drive
• Carrying handle
• Lever tube can be pulled out
• Case available

Wire Ropes

Wire ropes for the HIT 32 are available in varying lengths with reel and without. It is recommended that only Habegger wire ropes be used with their hoists. Use of any other wire rope will nullify the warranty.

Download